How to Maintain The Crusher In Hot Rainy Days

This summer, there are not only high temperature weather, but also more rainfall than in previous years, many areas appeared water logging. For the factory, most of the sand production line is fixed, and in the outdoor operation. In the high temperature and rainy summer, the crusher is exposed to the sun in the outdoor, and it is driven by the motor or diesel engine. The power supply part can not contact the water, so what is the protection for the outdoor work of the crusher and the grinder? 

The high temperature in summer not only makes the working conditions difficult for workers, but also affects the crushing equipment under the influence of high temperature weather. The cooling rate is slow after the operation of the equipment. If the temperature is too high, there will be shutdown and other faults, which affect the production schedule. In order to ensure orderly production, special attention must be paid to the following matters in summer high-temperature operation:

1, Pay attention to clean up the oil and dust of the engine body, so that the engine to maintain good heat dissipation.

2, Do a good job of crusher equipment maintenance work. Regular comprehensive inspection of equipment, equipment maintenance, replacement of engine "three filters" and oil, change or adjust the belt, check the fan, water tank, generator, compressor and other parts can be normal operation.

3. Check whether the cooling system and fuel system are patency, and replace the aging wires, plugs, tubing, screws, and tighten the fuel pipeline to prevent fuel leakage.

4, Replace the appropriate oil viscosity level, the general summer oil viscosity level is higher than other times. The engine oil and lubricants need to be replaced with summer oil, and the amount of oil is appropriate. Check regularly whether there is oil leakage, especially the fuel, and supplement it in time.

The rainy season brings a lot of inconvenience to the production of sand and stone. The crusher is generally driven by motor, and the power part cannot contact water, and the rain has a certain corrosive effect on steels and steels. Therefore, the rust prevention of the crusher body, the protection of the equipment line and the protection of the electric control cabinet are very important. The following maintenance skills of crushing equipment in the rainy season:

1, The motor part should do a good job of waterproof measures, to avoid the motor into the rain caused by the motor burning affect the normal crushing work, water is easy to conduct electricity, so it should pay attention to rain, do a good job of safety precautions. 

2. Avoid parking the mining machine too close to the edge of the cliff and ditch. All equipment should be parked in a place where the ground is solid and free of danger. It should not be parked in dangerous places such as slope, broken surface greater than 20 degrees and soft ground.

3. Check the motor wiring of the battery and maintain the crusher parts, and often supply power to the battery and maintain the preheating device.

4. Rainwater is corrosive to steel. Management and operators should take effective measures to reduce the impact of chemical corrosion on machinery according to the local weather conditions and air pollution at that time.

5, Regularly add some lubricating oil in the crusher. In rainy days, it is necessary to replace the crusher with special lubricating oil and grease in the rainy season, and pay attention to cleaning when changing oil.

Our team is professional and experted in powder producing line manufacturing industry, our products covers crusher, grinder, mixer, sifter, dryer, granulater and conveyer. We have strong technical support to guarantee the quality of our products. Please don't hesitate to contact us!!