At present, there are many manufacturers producing granulators in China, with varying product quality and after-sales service. If you want to buy a granulator for your own pharmaceutical production, please read on, here are some tips on selecting a dry granulator.
The R-angle fit between the stirring paddle and the inside of the pot bottom is also very critical. If the R-angle is too small, the material cannot roll normally from the bottom to the top and making the right R-angle is very critical to the uniform mixing of the material, and the R-angle is very demanding in the manufacturing process. The bottom of the machine made by stretching process is better, and the R angle made by welding, the joint is combined with materials, water and other corrosive materials for a long time, and it is easy to leak.
As single-layer pot is easy to shake and unstable during the production process, while sandwich pot can be heated and cooled for some special materials, which can better meet the production requirements, and at the same time, the bottom is not easy to be deformed during the long-term pharmaceutical process.
GK dry granules making Compactor Granulator machine
If the granulation process produces black spots, spots, the whole pot of material to be scrapped. The stirring paddle shaft of our equipment adopts gas seal and water cleaning. Cutting flying knife spindle adopts gas seal and metal hard seal double protection to ensure the sealing effect; cleaning method adopts water cleaning to ensure clean rinsing. If the machine adopts ordinary rubber sealing system, it will sooner or later have serious leakage problems and cause material scrapping. Sealing and cleaning system is also the key point of this equipment.
In the process of granulation, different time periods require different speed of stirring paddle, and only using two-speed motor to control cannot meet the production requirements. The use of frequency converter control can meet the production of a variety of processes, and can achieve good granulation effect.
Many dry pelletizer power systems use triangle belt and pulley drive (low cost), which can cause the production process of mixing power is not enough, and easy to slip. The choice of synchronous belt and pulley drive can ensure that the long-term manufacturing process is fully powered and better ensure the production requirements.
WANTONG's pelletizer ensures uniform size and high output of dry powder granules. It has a special feeding structure to ensure efficient feeding. The granulator uses roller cooling water circulation to ensure no sticky rollers. It does not require wetting agents such as water or ethanol to avoid repeating the drying process. High efficiency and low cost make it an ideal choice for you. Contact us now to buy the one you want! We'll reply to you asap.
Copyright © Jiangyin Wantong Pharmaceutical & Chemical Machinery Co., Ltd. All Rights Reserved
