What Is The Difference Between A 3d Mixer And A V-type Mixer?

3D Mixer Machine is a novel material mixer widely used in pharmaceutical, chemical, food, light industry and other professional and scientific research units. This machine can very uniformly mix powdery or granular materials with good flow functions, so that the mixed materials reach the most Good effect, let's take a look at the characteristics of the 3D mixer and matters needing attention.

3D Mixer Features:

1.The mixing barrels of the 3D mixer are planned together. The inner wall of the body is precisely polished, no dead corners, no pollutants. When discharging, the materials are discharged smoothly under the effect of self-weight, leaving no remaining materials. The advantages of easy accumulation and cleaning;

2.Low vibration, low noise, freely adjustable work stations, convenient installation and maintenance, and long service life;

3. Due to the multi-directional movement of the mixing cylinder, there are many materials mixing points in the cylinder, and the mixing effect is significant. The mixing uniformity is higher than that of the general mixer, and the error of the uniformity of the drug content is lower than that of the general mixer ;

4. The materials are mixed in a closed state, which will not cause pollution to the working environment; 5. Low height, small reversing space, construction (technical interlayer) generally does not need to stink 10,000 years, and the penalty area is small.

V-Type Mixer

V-Type Mixer can be used for the uniform mixing of dry powdery or granular materials with good fluidity, and the materials will not dissolve, volatilize or degenerate during the mixing process.

This machine is more reasonable in planning than the general mixer, with high mixing power and simpler operation. The mixing tube has a unique structure, high mixing effect, no dead ends, the cylinder is made of stainless steel, the inner and outer walls are polished, the appearance is beautiful, the mixing is uniform, and the use is wide, which complies with GMP specifications. According to customer requirements, it can be equipped with a forced mixer to mix with suitable finer powder, block-shaped materials containing a certain amount of moisture.

V type mixer can be used for uniform mixing of dry powdery or granular materials with good fluidity. It is suitable for medicine, food, feed, fertilizer, fuel, ore and other occupations.

V-type mixer advantages:

1. Compact structure, simple operation, stable work and no noise;

2, can adapt to the mixing of various materials, and the uniformity rate reaches 98%;

3. When mixing conflicting materials, V-type mixer works well;

4. When mixing materials with good fluidity and similar physical properties, a better mixing effect can be obtained;

5. Vacuum feeding and dish valve discharging can be implemented to achieve dust-free operation;

6.When mixing materials that are prone to condensation and adhesion, it is necessary to install equipment such as forced mixing blades or dispersion boards in the mixing equipment;

7. Adjustable speed, timing equipment and planned forced mixing can effectively ensure the uniform mixing of materials.

The filling factor of the v-type mixer is only 10%, while the filling factor of the 3D mixer is as high as 72%, and the mixing degree of the 3D motion mixer in each period is higher than that of the v-type mixer.

For a container-reversing type mixer such as a v-type mixer, the materials in the container change their position with respect to each other after being scattered or alternately raised and lowered. In order to make the material have a loose space, the container must have a large volume, so There is a certain limit on the amount of material to be filled, generally 30% -50%.

The structure and working characteristics of the 3D motion mixer make the material in the container periodically rotate, invert, and translate 3D motion. It has the characteristics of moving materials in succession by alternating pulsation methods. The convection and dispersion of the materials are very sufficient, even if The loading factor is very high (usually up to 80%), and it can reach a high degree of mixing in a short time.

The above is the difference between the 3D mixer and v-type mixer listed by the Ribbon Mixer Machine manufacturer.