Why Are V Type Mixer Widely Favored By Factories?

The factory has many machines for material mixing, such as two-dimensional mixers, Double Cone Mixing Machines, v type mixer, and three-dimensional mixers. So why are v type mixer so popular among manufacturers? What kind of maintenance work do many manufacturers perform when they do not use the 3D mixer? Let’s sort out the relevant information for the above two issues. Let’s take a look together.

Firs, why v type mixer are widely favored by factories?

v type mixer are mechanical devices that work by mechanical force and gravity, and then uniformly mix two or more materials. In addition, during the mixing process, you can continue to add the required excipients, mix them, and then add some adjuvants to promote chemical reactions and accelerate physical changes.

With the continuous construction and development of society, the V-type mixer is becoming more and more mundane and more and more. It has brought convenience to social construction, and it can be applied to a variety of industrial mixing, which can be said to be a multifunctional multipurpose machine.

V Type Mixer

Second, cleaning rules for V Type Mixer

1. Establish standard operating procedures for mixer cleaning to ensure process hygiene.

2. Cleaning method

(1) Cleaning between batches of the same product and specifications: Put the mixing barrel in the discharge device and open the feeding port. Vacuum the medicine powder on the inner wall surface of the bucket with a vacuum cleaner. Rinse the inner wall of the mixing barrel, the flat cover, and the clamp with a hose connected to the tap water. Rinse with a rag while rinsing with water, and wash until there is no drug residue. Rinse the inner wall of the bucket, flat cover and clamp three times with pure water, drain the bucket of water, cover the flat cover, and tighten the clamp (note the seal). Wipe the outer wall and shake wall of the mixing bucket with a damp cloth dampened with purified water. Pay attention to rocking wall joints. The connection between the shake wall and the mixing bucket is the focus of cleaning. It should be thoroughly wiped, rinsed with purified water, and wiped with a clean rag; open the flat cover of the discharge, and dry the inner wall with a clean rag. After cleaning, the mixture will be allowed to dry naturally, if necessary, wipe thoroughly with gauze dipped in 75% alcohol.

(2) Cleaning of the same variety and different specifications or exchanged varieties:

Wipe the outside of the mixing cylinder and the body with a cloth dipped in detergent. Pay special attention to the cleaning of connection parts, gaps, seals and other parts.

After rinsing with water and rinsing the detergent, rinse three times with purified water. Wipe dry with a clean cloth and wipe with gauze dipped in 75% alcohol if necessary. Open the flat cover, wipe the inner wall with a clean rag, wipe with gauze dipped in 75% alcohol, dry naturally, and set aside.

Three, three-dimensional mixer cleaning method

1. Open the door of the three-dimensional mixer and the door of the warehouse, blow it in with an air pipe, and blow off the dust and material on the surface.

2. Unplug the air pipe of the 3D mixer or bend the air pipe. Make sure that there is no air to the mixer. (When the door is open, the material that will be cleaned will fall down and be ventilated, otherwise the mixer will automatically close the door)

3.Brake

4. Fix the fan to the door and blow it in. Personnel should wear long pants when entering. The skin must not be exposed! Wear hard hats and masks. There should be two people, one to enter and one to help out.

5. Substitution work based on half an hour!

6. Enter the 3D mixer, first remove the spray head with a wrench, and blow it out with air. Use a shovel to remove the material from the silo wall and the blades. (The shovel is homemade, and the iron is welded to the iron pipe according to the size of the mixer, and the iron side is polished.)

7. If necessary, you can manually turn the paddle to clear the dead corner. Install the nozzle after cleaning.

The above is the relevant introduction of the Powder Mixer Machine supplier for the reasons for the popularity of v type mixer, and the cleaning procedures of v type mixer with three-dimensional mixer cleaning methods.